Jump to content

Making And Tying A Better Popper (A Bit Pic Heavy)


Recommended Posts

This is kind of flysmallie inspired. I wanted to start making and tying poppers. By seeing Ronnie's work it got me kick started. Started by buying kits with hard foam bodies. Glued some up and started to paint. Used a combo of brush, stippling (various dot sizes) and spray paint from cans. This gave me the results I wanted and I am getting better as I go. Tried to use a clear spray paint finish with mixed results. It did water proof the paint but not too durable. if you had a bad back cast or shot the line too far and hit a rock on the river the popper would explode and loose a chunk of foam. Trial # 2 was with epoxy. I was a bit scared with this as the only epoxy I have ever used was 5 minute. It got hot and runny. Worked fine on my epoxy minnows setting quick and I did not mind turning the vice for a couple of minutes on them. I have a epoxy motor driven driver that I had never used so here we go with 2 ton 30 minute stuff. Ok I picked a popper, mixed up a small batch, took a small disposable paint brush and give it a coat. Hey this stuff is pretty thick! Put it on the drier and let it spin. Watched the puddle of unused epoxy on my mixing paper and when it started to set up I turned the drier off. Checked out my prize, very happy with the finish. Then I started tying, making more and painting. They fish good too! I will start off with a few untied bodies. Please have patience with my photo taking:)

post-8405-0-05815300-1374702275.jpg

post-8405-0-90024300-1374702298.jpg

The one that looks like a clown Mrs. BilletHead painted. Don't laugh, she will catch fish with it.

More that are tied and finished Some of these are kind of ragged because they have been munched on by bass.

post-8405-0-91424900-1374702316.jpg

post-8405-0-72453700-1374702359.jpg

post-8405-0-23153200-1374702385.jpg

post-8405-0-53452800-1374702408.jpg

post-8405-0-42126400-1374702429.jpg

post-8405-0-08155300-1374702477.jpg

post-8405-0-56323800-1374702503.jpg

post-8405-0-71086900-1374702529.jpg

post-8405-0-75429000-1374702553.jpg

Ok now I have been messing around with balsa and doing it all,

post-8405-0-45066800-1374702573.jpg

Various stages of the process with three stages.

Ok here is Pat's favorite,

post-8405-0-66615700-1374702450.jpg

And one of her bass from the other day

post-8405-0-23303900-1374702595.jpg

The one I was using that morning and me with a fish,

post-8405-0-96013200-1374702341.jpg

post-8405-0-86047300-1374702613.jpg

I hate to say it but Saturday morning she out fished me with the pink one but Sunday morning early I got even. Ok one more of the Mrs. Her first hybrid on the fly rod, on a popper to make icing on the cake I am not sure who had the biggest smile that day her or me,

post-8405-0-49134100-1374704156.jpg

POPPERS ROCK!

BilletHead

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Link to comment
Share on other sites

Very Nice. I like the paint jobs.

If fishing was easy it would be called catching.

Link to comment
Share on other sites

Thanks guys,

Lancer the only time I am using spray now is when I want to two tone/scale/blending effect. Other than that just a brush base coat of white, other colors and then the dots. Dots made with pin heads, needles with ends filed smooth to size desired. Not my original idea. There is another fellow who does this really neat with the dots. His work is unreal. You could use spray for the base coat desired but once you smooth on the epoxy any brush marks, divots etc. disappear. As for paint I am using acrylic craft stuff you can get at walmart. Hobby lobby has more color choices. Let your imagination run wild.

BilletHead

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Link to comment
Share on other sites

Three shades of yellow, hummmmmm Got to get more paint:)

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.