Jump to content
OzarkAnglers.Com Forum
KC Trout Fan

Trolling Motor Help

Recommended Posts

I am looking for a replacement part in Kansas City. It is the foot swtich under the pedal. It is for a motor guide trolling motor. I have found the actual switch part but can't find the rubber piece that goes over the top? Any suggestions? I have friends/ family down there if there is somewhere I could buy one from near Branson area.

post-3192-0-48225200-1377481327.jpg

post-3192-0-83754900-1377481341.jpg

Share this post


Link to post
Share on other sites

Put a little dab of grease around the button and forget the rubber cap. It does a better job of holding moisture in than it does keeping it out.

I don't think that will work.... The rubber cap raises above the switch to elevate the grey trigger on the foot pedal..

Share this post


Link to post
Share on other sites

Agree with fishinwrench!

rubber cap is just protection for the switch. Try the grease!

If necessary, just build up the bottom of grey trigger on the bottom with some JB Weld or magic putty to keep the trigger up above the foot pedal.

Otherwise, go to Lowe's, HD or your local Hardware store and you can buy some of those soft rubber tips that are used on the end of wire shelving and glue it over top of old the rubber cap?

Share this post


Link to post
Share on other sites

Give Marine Repair a call in Springfield at this number, For product inquiries: Call (417) 833-9191 or email at info@marinerepaircenter.com they should be able to provide you what you need. They are a MotorGuide sales and repair shop, great guys to deal with......

Share this post


Link to post
Share on other sites

Give Marine Repair a call in Springfield at this number, For product inquiries: Call (417) 833-9191 or email at info@marinerepaircenter.com they should be able to provide you what you need. They are a MotorGuide sales and repair shop, great guys to deal with......

times two. they will have just what you need. i have done business with them for years. always the best service bar none.

bo

Share this post


Link to post
Share on other sites

I was fishing on Table Rock today, talked to a guy who has had to replace this part in the past, he reads this board and asked me to post. Anyway he says that Burton's in Springfield has those caps and they are cheap as mentioned above.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.