Jump to content
OzarkAnglers.Com Forum
Sign in to follow this  
Bill Babler

2018 Motorguide X5 105 36V bow mount 50" TM

Recommended Posts

MAKE OFFER. ANYTHING REASONABLE WILL BE ACCEPTED.

I have for sale a 2018 bow mount Motorguide X5 36V 50" trolling motor with 105 lbs. thrust. Digital with Kevlar shaft

Motor was new this past January and only slightly used.

IMG_2641.jpg

It has an extremely hot new transducer that I'm only running on 58% 

IMG_2640.jpg

IT has the following add on's in addition to the transducer:  TH Marine Equalizer lift assist

IMG_2637.jpg

TH Marne Prop Anti-vibration Nut 

IMG_2638.jpg

Machette Prop

IMG_2638.jpg

The add on's are worth over $200.00  I also have the original prop and prop nut unused.

This is not a GPS pinpoint unit, it is a straight 36V trolling motor that is almost new out of the box and works perfectly.  If you need one or just a spare and don't want to spend a couple of thousand on a Minnkota or over $1,500 on a new one of these you can buy this one for.

ANY REASONABLE OFFER ACCEPTED

Call or send a PM 417-332-7016

 

 

 

 

IMG_2639.jpg

Share this post


Link to post
Share on other sites
On ‎6‎/‎11‎/‎2019 at 12:12 PM, Bill Babler said:

I have for sale a 2018 bow mount Motorguide X5 36V 50" trolling motor with 105 lbs. thrust. Digital with Kevlar shaft

Motor was new this past January and only slightly used.

IMG_2641.jpg

It has an extremely hot new transducer that I'm only running on 58% 

IMG_2640.jpg

IT has the following add on's in addition to the transducer:  TH Marine Equalizer lift assist

IMG_2637.jpg

TH Marne Prop Anti-vibration Nut 

IMG_2638.jpg

Machette Prop

IMG_2638.jpg

The add on's are worth over $200.00  I also have the original prop and prop nut unused.

This is not a GPS pinpoint unit, it is a straight 36V trolling motor that is almost new out of the box and works perfectly.  If you need one or just a spare and don't want to spend a couple of thousand on a Minnkota or over $1,500 on a new one of these you can buy this one for.

$600.00

Call or send a PM 417-332-7016K87N8hDcQTTKKFTioSxqB8Q2BNX5JtAljwgAAAAB

 

 

 

 

IMG_2639.jpg

Deal like that makes me wish that I had a boat :D.

Share this post


Link to post
Share on other sites

I finally got the install done. Put in a recessed pedal pan, hard wired the trolling motor, used an adapter to hook up to the Hummingbird. Put a 12 volt power plug where the original trolling motor plug was, for phone charging or a light. In the back I installed another battery and a switchable breaker for a disconnect. Still need a couple more battery terminal covers. It's ready for fish now.

IMG_1226.JPG

IMG_1227.JPG

IMG_1230.JPG

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.