Jump to content

Recommended Posts

Posted

THE BIG DRY

IMG_4875.jpg

Recipe:

Hook: Standard dry fly hook # 4

Thread: Uni- thread 3/0 black

Body: Peacock herl (4 strands palmered)

Wing: 1/8 “ foam cylinder and calf tail with flashabou accent

Legs: Round rubber med. (black)

Hackle: 2 Grizzly hackles palmered

TYING INSTRUCTIONS:

IMG_4849.jpg

Step 1.

Start the thread somewhere in the center of the hook shank. Tie in four strands of peacock herl and wind it to the bend. Advance your thread up the front again.

IMG_4850.jpg

Step 2.

Twist the herl and then wind it up 3/4 to the front of the hook. Leave a little space for the foam post. Cutt of the excess.

IMG_4853.jpg

Step 3.

Know if you buy the pre made ones from Wapsi you will just grab one and tie it in. The length you want is a little past the bend of the hook. I also cut the foam at an angle on both sides. This will help you tie it in better and the back just gives it a nice look. You don’t have to cut the back, but the front one is really important because of the way you tie it in.

IMG_4855.jpg

Step 4.

Cut about 8 to 12 strands of flashabou and tie it in. Cut it to the same length as the foam or a little past it.

IMG_4857.jpg

Step 5.

When you go to cutt the calf tail, get it as long as you can because you will need it when you go to tie it. measure it the same length as the post.

IMG_4861.jpg

IMG_4862.jpg

Step 6.

Tie in the rubber legs on each side of the hook shank. The legs will be fairly long so make sure cut them longer. Tie them in the center of the legs. You can trim them to your desired length after your finished with the fly.

IMG_4869.jpg

Step 7.

Once you tied in your legs you are ready to wind the hackle forward. I do about four to five turns with each one. I don’t grab both at once though. I like to wrap one and then the next one. It just makes a better profile with how the hackle will look like.

IMG_4870.jpg

IMG_4875.jpg

Step 8.

Whip finish the fly.

NOTE: I use this fly in high water and in fast riffles. Throw it in the riffles and when it gets to the tail out of the riffle try skating it. That's where you'll get a lot of your strikes. I have caught a lot of big fish on this fly. Also if it windy this fly will work just as well. Good luck!

Accept the drift.....<>>><

flysandguides.com

Visit my blog

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.