400w Multi Vapor Lights For Gigging

[bclift65706]

I have 2 sets of 400w multi vapor gigging lights for sale 1 set $100 the other $150 boath work good you con also run 400w matal halid bulbs they are alot brighter. can also get new reflecting shield made to fit your boat for $$. I use mine all year for gigging & running jugs . Can also build gigging racks weld holes in boats .Little early for gigging but they are for sale now.

[bclift65706]

I have 2 sets of 400w multi vapor gigging lights for sale 1 set $100 the other $150 boath work good you con also run 400w matal halid bulbs they are alot brighter. can also get new reflecting shield made to fit your boat for $$. I use mine all year for gigging & running jugs . Can also build gigging racks weld holes in boats .Little early for gigging but they are for sale now.

I SOLD the set for $150 today still have the set for $100 I might have some fish giggs for sale made some out of T100 armor plate got to give them the beat the heack out of them test for a while see if the weld between gigg head and shaft will hold up. I have one made from AR36 plate (not as hard as T100) I used last year and never sharpend it and dont think it will need sharpening this year.

[bclift65706]

still have 1 set and might have another before long $100 thats pretty cheap for what they are this is for boath balast and bulbs and the ceramic insulaters the bulbs screw into. season opens september 15 can get reflector shield made to fit your boat I will get mine set up when I get some spare time and post a few pics . Can install them and build the giging rails if you are just getting stared in my shop for a small fee. call me 417-838-8547

[Muleball39]

how much for a gig out of T100?

[Muleball39]

Have you had a chance to test them t100's yet? Also do you know where to get some fiber glass handles in 10' to 15' range?

[bclift65706]

am going to this weekend when I get some time been busey with work and football practice when I find out for sure will let you know. I will have one. I have them cut just need to weld the head to the round stock and then to the coupler for the handel to atach. my handels came frome show me power from a frind of a friend .