Jump to content

Recommended Posts

  • Members
Posted

My motor is a 2000 Johnson 60hp model J60PLSID. It starts fine, idles fine, WOT fine, but when you shift it out of neutral and operate at the lowest speed possible it idles rough, shakes and surges sometimes. Shift it back into neutral and it idles back up fine. I have put the Star Tron additive in the fuel ever since I bought it last year. I've never replaced anything except the spark plugs. Any ideas on what might be the problem? Thanks.

MCHUNTER

  • Members
Posted

McHunter, You actually have a 2001 Engine. One common problem I see with those is the timing linkage coming loose or falling off. The idle speed screw is mounted in a plastic holder on the timer base. On the starboard side of the engine, look under the flywheel. There will be some wires in a black sleeve running down the side of the motor. Right where the wires go under the flywheel there should be a black plastic piece screwed to the timer base arm with a flat headed stainless steel screw that is the idle speed screw. Make sure it has not fallen off and laying in the lower engine cowling. If everything looks OK, you will probably need some professional help. If you need a picture send me an email referencing your model number and this forum. sonsacmarine@hotmail.com

  • Members
Posted

McHunter, You actually have a 2001 Engine. One common problem I see with those is the timing linkage coming loose or falling off. The idle speed screw is mounted in a plastic holder on the timer base. On the starboard side of the engine, look under the flywheel. There will be some wires in a black sleeve running down the side of the motor. Right where the wires go under the flywheel there should be a black plastic piece screwed to the timer base arm with a flat headed stainless steel screw that is the idle speed screw. Make sure it has not fallen off and laying in the lower engine cowling. If everything looks OK, you will probably need some professional help. If you need a picture send me an email referencing your model number and this forum. sonsacmarine@hotmail.com

Thanks Bill. I will check that out.

MCHUNTER

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.