Jimmy Johnson

Thanks for the Reply Brain.....I have a fairly big boat "18.10" Legend with a 90hp jet. I have been able to run pretty low on the meramec, but I'm not familiar with the Gasconade don't want to come across a surprise. If I can run up 4-5 miles and float/fish back that would be fine. I just didn't want to take the drive out their to find out I couldn't only run 1 mile up river "safely". What are the other popular spots folks but in boats and run that have descent water? Thanks

Was wondering what the water level above Boiling Springs is like? I did a section last year from Riddle Bridge to Boiling Springs and had good success fishing. I have a Jet boat now, and really love to put in at Boiling Springs, but am not familiar with the Gasconade and if a jet would make it up there this time of year? If the water level is good about how far up could I run and is it a decent run. I have gotten used to the boat and have been running the Meramec since i got the boat. If the water is two low, where would be another option to but in an fish for the day? May run up to clear water below hwy K if it is to low. thanks Maybe Seth will get on hear and help me out. Thanks

Another question for you. Where are you installing the tranducers on these boats? They have trim tabs on the bottom as well as the revits or welding points on the bottom. If I install transduce in line with these welding bumps, won't that create bubbles for the transducer. It looks like I really only have two small spots to mount tranducer on left or right of motor? I'm the image below you can see the trim tabs and the revit points next to them. Thoughts, thanks

Hey Seth, glad you commented on this....my boat didn't have a stainless impeller. Would I really gain much more to use a stainless impeller? Also what would one typically run and where can you get one? Was going to let cowtown do a three maintance on it this fall just so I know everything has been checked over. Wonder if they provide the service to swap out an impeller?

No I have not been able to get her above 32. Took it out to Kin Kiad Lake on Friday with the wife and kids and still only maxed out at 32. This is with a full 26gallon tank, and a bunch of junk in the boat for the wife and kids. Guess I thought this thing would be able to hit 36 myself. I guess it is a heavier boat than what I thought. I heard people talking about getting stainless impellers for the jet, but don't know how much more speed that will produce for me. Still loving the boat though