gotmuddy Posted December 30, 2011 Posted December 30, 2011 Today I replaced the transom and the board on the jackplate, it needed it BADLY I used 1/2" plywood three pieces thick for the transom board. I used f26 to glue the wood together and used decking screws to hold the boards. the board that came out was a inch thick and I replaced it with a 1.5" thick piece so it was a tight fit. I made good use of the snap on deadblow hammer for beating the hell out of the board. Here is a pic of it all bolted up: Here is a pic from the backside. I used clear silicone to seal up all the bolts. everything in this post is purely opinion and is said to annoy you.
LittleRedFisherman Posted December 30, 2011 Posted December 30, 2011 Congrats Cody, we will have to meet again at the Narrows and go fishing again sometime. That boat should fly with that jet. I was impressed that day with that jackplate with the lever, I couldn't believe you got where you did with that prop. Congrats!! There's no such thing, as a bad day fishing!
gotmuddy Posted December 30, 2011 Author Posted December 30, 2011 It will be a week or two before I can hit the narrows, I gotta wait for the baby before I can be out there with no service. everything in this post is purely opinion and is said to annoy you.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now