Will S.

Horses printed on real leather. Professionally mounted & framed. 16 x 24 inches. 2" thick. (Eureka Springs gallery where I sold photography closed down- I brought my remaining inventory home including these horses). Leather Print $150 I also have this photo printed on METALLIC paper 8 x12 inches, in a black mat that will fit any standard 12 x 16 inch frame. Many other local photos also available. Matted Metallic Prints $30

SOLD !

I still have these two items.

(SOLD). 2 NEW NEVER INSTALLED Amarine-made Stainless Steel Slide Mount Removable Fishing Rod Holders BOTH FOR $35.00 NEW IN BOX(S). (In Holiday Island) Perfect for TROLLING ! New Price: $27.99- 36.00 eachFree Shipping for Prime Members Mirror finished stainless steel construction, for sleek appearance and to suit today's modern watercraft,Stainless stopper pin built into the base of the rod holder to located the rod butt into position Vertical mount removable rod holder can easily be removed when not in use,8mm diameter drain hole at base of rod holder to drain any captured water Rod holder protrudes at a 30 degree angle when mounted When rod holder is removed, only the low profile mounting bracket will remain mounted, Ideal for small tinnies when space is limited, or boats that aren't constantly used for fishing Easy to install, mounting bracket requires 4 countersunk screws (screws not included), Rubber insert to protect your fishing rod from any wear against the stainless surface

Anyone know of a classic car museum near Holiday Island Arkansas ? Looking for old Corvettes, Mustangs. Olds sports cars.. Thanks for the leads ! Bill

I should take some pics & post here & sell them all as one lot.

Just to be clear. I still have these ! It would be most cost effective if someone near Holiday Island wanted them.

I am in HOLIDAY ISLAND, near the marina.

TWO Frrabill Crawfish Traps (Black 12 x 12 x 5-Inch Flat) $15 for BOTH. #averageCustomerReviews, #averageCustomerReviews_feature_div, #ask_feature_div { display: inline-block; *display: inline; } Was: $22.35 Price: $19.99 & FREE Shipping on orders over $25. Details You Save: $2.36 (11 Want it Thursday, May 11? Order within 9 hrs 21 mins and choose Two-Day Shipping at checkout. Details Ships from and sold by Amazon.com. This fits your . Enter your model number to make sure this fits. Low profile square shape covers large trapping area Hinged back door makes for easy baiting and catch removal Heavy-duty vinyl dipped steel mesh construction New (3) from $19.99 & FREE shipping on orders over $25.00. Details

Thank you !!!

Minn Kota® Extension Handle $10 (Don't need) Keep in control of your trolling motor, while still fishing comfortably. This extension handle allows convenient, away-from-the-motor boat control for all Minn Kota hand control bow mount and transom mount motors. Also works great with small outboard motors. Compact 18" length won't get in the way. Neoprene handle. LIKE NEW. $ 10 Also,,,,,,,,,,,, Mushroom anchor $ 5

Is there electricity to the lifts ? Id like to put my boat back up & charge the trolling motor batteries after I go out...Thanks, Bill

SOLD !

SOLD !

Off to a new home !!! Loved that rod. A few guides replaced it will be awesome for the new owner. So glad it lives again !!!

I will have a GUY STUFF table at our garage sale this weekend. 311 Holiday Island Drive. LOTS of fishing stuff. Newer & New crankbaits Yamamoto stuff, some rods & baitcasters, crawfish/minnow traps, ratchet straps, tow strap, some tools but not many. Insulated bibs & jacket like new, similar to Carharts (I don't shovel snow anymore). Foam floor anti fatigue puzzlemats . More stuff of interest. Probably will sell out Friday ( suppose to rain Saturday anyway) The Johnney Morris rod (that needs guide repair) will be on hand FREE if you want it- just tell me you seen it on this forum.

darn.........

I used one SIMILAR on my golf cart. On MY version, the end of the wire just WRAPPED around the spark plug wire. It did work just fine, but never had anything to compare it with to check calibration.

Anyone use "Krylon 3400 Clear Non-Skid Coating" on fiberglass boat deck ?

UPDATE: SUCCESS Using a Hotspots map & Google Earth, I 1)saved waypoints to a folder in google earth. 2)Right Clicked Folder & said SAVE AS name.KML 3)used a program https://kml2gpx.com/?results to convert KML files to GPX files 4) Saved GPX files to a folder 5)Copied GPX files to a 2G micro sd card (Lowrance only recognize 2g or smaller cards) 6)Put the card into the Lowrance, turned it on 7)selected waypoints-trails-routes 8)menu to: Load from SD card New waypoints saved to Lowrance internal memory. Removed GPX card. Put the Navionics card back in & all works great ! All this allowed me to save some HotSpots locations, and save locations of some people I know & places I want to return to (no waypoint for nude beach)

Further researching, I found my answer, I am trying the IMPORT waypoints from a sd card to the units memory. I found a video on how to do it, convert files & upload to the unit & verified the capability of my Lowrance. So I believe life is good again ! I will be trying I all out the next day or two.

Here is the real issue/plan... I have the NAVIONICS chip IN my Lowrance unit. I want to enter pots from "Hot Spots" into my unit. If I use a chip/card then I have to take OUT the Navionics card and insert the Hot Spots card. HOW do we get the information from BOTH cards to show on the unit at the same time. The Lowrance unit does not save the card info right ? It only kinda downloads or more accurately just reads the info on the card that is currently installed. So if all this is correct above, then I am back to my original question REWORDED: Can I TRANSFER sd card information into to a Lowrance unit. . Using an Elite 5DSI with only 1 card slot.

ok great ! Thanks for the info.

That is interesting. Are you able to attach your actual Lowrance unit (not the card) to your PC ? That is what I want to do.