Motor Guide Prop Pins

[lonkm]

Does any one know where I can buy pins for a 70# thrust ? I don't want the kit. I don't need the wrench, the small pin or the nut. I have tried all the places that I know. Thanks Lonnie

[fishinwrench]

lonkm,

I can get them and mail to you if needed, but a quicker option would be to fabricate your own from stainless steel, or aluminum roll pins, via your local hardware store.

If you have the prop wrench that comes with it, pry the pressed on cap off the handle of the wrench and you'll find 2 spare drive pins inside it.

If you need me to send you some shoot me a PM with the make, model# and serial# and I'll hook you up.

[BredMan]

Not sure where you reside but TriState Trolling Motors outside the STL area does a great job and very good customer service. They fix the motors that other dealers mess up fixing. I just purchased a Motor Guide 54 Digital last year and found out there are two pin sizes. One is thinner than the other and I was advised to throw out the thin ones. The wrench I was given had the thinner pins as well and the extra pin that came wih the motor and the motor pin itself had the thicker diameter.

Otherwise you can fabricate your pins if you can find the right stainless rolled stock.

TriState Trolling Motors

[lonkm]

I found a place in Springfield. It is called " Marine Repair Center ". They have parts for and fix almost every kind of trolling motor. Their number is 417-833-9191. Got my pins cheap!!