wily

I’m pretty sure I found the fuses...replaced em...and got the passenger side to come back on...now I wish I hadn’t cut the jumper im done for the night...thanks

Where is the tail light fuse? Thanks

Here’s the fuse box’s...blinkers work...test light works looking for tail lights the first one is under hood...smaller one is on side of dash

Ok...going to pop the hood now...I think I screwed up when I cut that jumper wire out my truck is a 2000

I Think you’re right on the trailer problem...but I’m worried about the truck...now both tail lights are out...I cut the cheater wire out and hooked it back to itself...just to see if other side would come on...but it didn’t going to take it to a shop in am I guess i tell ya...it’s always something

Jumped a wire to the brown wire...had the tail lights and license plate lights working...had power to trailer light plug... hooked boat plug to truck plug...heard a slight sizzle now back to no tail lights on either side.... what do you think? Besides the obvious...that I’m a bonehead

Shouldn’t I be able to prick the wires before the splice and get them to light up? the tail light is the brown light at top...and it’s spliced twice...Looks like that is where it was spliced to get the power to the trailer lights. Going to check it for power before the splice... the boat blinkers don’t work when plugged in...already checked thanks

I took the tape off but still nothing on the light

Starting fresh this morning... I think the problem is somewhere in this birds nest but when I get under there to check it....I can’t get anything to light up but I know the test light works...I checked it on a battery

Come on...I’m not that stoned...🤤 I’m just poking myself in the finger...my finger tips feel like a pin cushion. Dont you give up on me yet wrench...I’ve been watching YouTube...will keep you posted

I hear ya...I thought it would help do you have to pierce the wire for the light to work...I push it hard into it...the deal slides off and cuts the crap out of my finger...I got some gloves tho...will put them on next time I try it either I don’t have it grounded or the light doesn’t work...I took the passenger side light off and tried testing it but it isn’t making the light work...but the tail light works sheez...I don’t even know what I’m supposed to do if I find the wire works or doesn’t...there’s a reason people like you make a good living...it’s off of poor saps like me

It’s off and on raining around here...I’ve tried messing with it...but I don’t know what I’m doing...and I’ve poked myself with that test light about 10 times...and it’s sharp im frustrated with it

We went this morning...took the bigger boat and put in at twin bridges...we fished 4 hours the boy and me...we started on a mud bank a 1/4 mile short of the high line...and caught crappie and white bass mix in about 20 foot of water...then moved up past the high line by that little cut...and found another group in 12 foot...stayed there for a bit...bunch of dink’s mixed in with them there...but was a lot of action the moved up past the boat ramp and just kind of wandered around up there on that gravel...and caught quite a few...the big fish came from up there... we were 6th boat in the water this morning...and one of the first to take out...we peeled out before the rain water was 54 degrees

We went ahead and took it this morning early...got into some crappie while white bass fishing that crappie is an 1o or 11 inch fish...the white bass was 17 headed home now to see what I can do with the lights...thanks for help...will keep you posted

Ya...the tail light is out now all time...the blinker works on both sides nothing on boat works thanks

I took it apart...where do I hook the roach clip to? I have one of the test lights with the pointy end...looks like a screw driver i don’t know what I’m doing...I tried hooking clip to the body to ground it...still not working i tried to test the 4way and none of those lit up either? thanks

Thanks for the help...Sounds easy but I’m a bonehead...will let you know what I find...thanks

I forgot to unplug my trailer lights before putting the boat in tonight...and now one of my drivers side tail light...and the license plate light...and my boat trailer lights aren’t working i looked at the fuses in the truck but they look ok...what do you guess it is? A bad ground or something? I’m not very mechanical...the trailer is old but the lights worked... thanks

Watch craigslist...can get some good deals in decoys...I bought 36 g&h for a dollar a piece last summer...10 or so had swivel heads...had to rig em though... current deal I’m working on is for some big foots...the guy has 33 of em total...but we’re a little off on the money...and I really don’t want them all...they take up too much room don’t skimp on the decoys...you look at the decoys a bunch while you’re hunting...so buy some you like... iF you rig tx style...tie the cords in an overhand knot...before putting into a bag...or get the strap weights and wrap the cord around keel....either way seems to work fine

Do you have the foot pedal or just the remote? Looks like you can buy it either way...between you and r83....I need to upgrade.

He’s a goof...disregard

Jeez

Good for you...it was a beautiful day...congrats

Only fake news if you don’t know how to catch them...come down...I can help show you how