Jump to content

Recommended Posts

Posted

I am going to Taney for the first time next Thursday and have a few questions:

-I've checked out the generation schedule but don't know what to look for and what numbers are ideal? I'll be wading.

-Is the Hatchery access my best bet?

-Also, are those rubber leg jigs from Maramec Springs legal above fall creek. I know there is rubber in them but I remember hearing that they were legal in the fly section of Bennett? Are they actually legal in Zone 1 in Bennett?

-What would you recommend to catch some bigger fish?

-I was thinking about crankbaits or jerkbaits to go after bigger fish. Can I get away with 4 or 6lb fluorocarbon if I do so?

Any other tips or things I need to know would be great. Thanks

"Of all the liars among mankind, the fisherman is the most trustworthy."

"There's a fine line between fishing and standing on the shore like an idiot."

Posted

I can't say whether or not the rubber legs would be considered legal or not without a picture of the jig in question.

Your fluorocarbon should be 6-8lb in 4 units I think.... just so you can be on the safer side of not losing lures.

Jig and float works rather well... fished inbetween outlets 1 and 2. Try them crankbaits but be careful not to hang up.

The outlets 1 2 and 3 are your best bets for locating fish. Do not be afraid to try the entire other side of the river too.

good luck, Brian

Just once I wish a trout would wink at me!

ozarkflyfisher@gmail.com

I'm the guy wearing the same Simms longbilled hat for 10 years now.

  • Root Admin
Posted

I am going to Taney for the first time next Thursday and have a few questions:

First, alot of your questions have already been discussed on the forum and covered in articles here. You might go through them and see what you can pick up.

-I've checked out the generation schedule but don't know what to look for and what numbers are ideal? I'll be wading.

We just talked about this not long ago. One unit equals 55 megawatts. We have 4 units. If you're wading only, you're pretty much limited to fishing close to the outlets and alittle along the edges.

-Is the Hatchery access my best bet?

Depends on how much water is running.

-Also, are those rubber leg jigs from Maramec Springs legal above fall creek. I know there is rubber in them but I remember hearing that they were legal in the fly section of Bennett? Are they actually legal in Zone 1 in Bennett?

Yes they are fine as long as they are incorporated in the building of a fly.

-What would you recommend to catch some bigger fish?

Bigger flies. Articulated streamers using sink tip but again, depends on how much water is running.

-I was thinking about crankbaits or jerkbaits to go after bigger fish. Can I get away with 4 or 6lb fluorocarbon if I do so?

Any other tips or things I need to know would be great. Thanks

Depends on the lure. The bigger the lure the larger the line size.

Lilleys Landing logo 150.jpg

Posted

Thanks guys. As for a backup, are there some public accesses down stream where we could fish from a dock or the bank? I remember when I was about 10 we did that but I'm pretty sure those docks are condos or stores or something now.

"Of all the liars among mankind, the fisherman is the most trustworthy."

"There's a fine line between fishing and standing on the shore like an idiot."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.