Suggestions Please - Large Unweighted Slip Bobber

[mic]

I've been trying to find large unweighted slip bobbers that can handle some weight with no luck. Due to the lay out of my closest pond, I need to really cast some distance to get to good water for cats. I can only get there with half to one ounce weights. I like turning wood so I thinking about making my own for fun.

1. Does anyone know where I can get some pre-made ones? I have found some weighted, but that's not what I want.

2. If I make my own, does anyone have any ideas for the internal slot slash hollow pole the line goes through. I would need something in brass or plastic. I would like it to be at least 12 inches long. My plan is to cut some blanks. Cut them in half. Rought out a slot for the hollow pole. Glue it all together, turn it, and paint. I haven't strolled through the local hardware store for ideas yet, but if you have a thought please let me know.

[oneshot]

I made some Floats using Pool Noodles,cut off 4-5 inches,run Coffee Stirer crosswise through it,Glue it,use Regular Bobber Stop with Large Bead.

oneshot

[straw hat]

The bobber that oneshot just decribed is on youtube. There are several videos on making bobbers with pool noodles and other ways. You might check it out. I have used some of the pool noodle bobbers and they do well.