Root Admin Phil Lilley Posted January 25, 2013 Root Admin Posted January 25, 2013 You can hear it... it was howling today at the dam. Straight up lake. White 1/8th oz jig, worked it behind the boat downstream. Missed 90% of the bites. Did float a miracle fly under a float and only caught one small one. Only had an hour or I'd try other stuff.
luckycraft Posted January 25, 2013 Posted January 25, 2013 When they are running 75 mw or 1.5 units, what will the automated computer generated message tell you they are running 1 or 2?
Root Admin Phil Lilley Posted January 25, 2013 Author Root Admin Posted January 25, 2013 2 or even 3 units. It looked like 3 at the dam face. They can run all 4 units but only run them at, say, 25%. If you want to know HOW much water, need to note the water level.
luckycraft Posted January 25, 2013 Posted January 25, 2013 Thanks for the info. If I have this correct, when you call the phone line for the number of units generating, you really don't know how much water is going through, only if you check the chart on the generation website?
laker67 Posted January 25, 2013 Posted January 25, 2013 After the computor tells the number of units, it will tell TR lake level and Tailrace level. Tailrace is 702 when "no" water is generating. One unit at one hundred per cent, will raise the lake level about three foot. So listen for the number of units, and the tailrace level. This will give you a good idea of what is happening at that moment. Compare that info to the spa chart for a cross reference and the extended schedule for the day.
Root Admin Phil Lilley Posted January 25, 2013 Author Root Admin Posted January 25, 2013 Level tells you how much water is running on the phone call. Levels and megawatts on the website charts.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now