Jump to content

Recommended Posts

Posted

Nice fish, but at a minimum, he should have split time btw Zig Jig and online spinner. Jigs catch big trout too

Every Saint has a past, every Sinner has a future. On Instagram @hamneedstofish

  • Replies 24
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Members
Posted

I'm seeing a lot of talk about this "zig jig".... I have never used one. I do tie my own jigs and have for years... seem to work for me. I did look the zig up and found their site. Seems to have a little different action than what I make up. Question is, are they really any different than any other jigs? I tend to stick to the fly rod but my wife and I are heading down to the NFTW in few weeks and she only uses a spinning rod. She does fairly well with a rooster-tail and I have tried to get her to throw jigs, but like the fly rod, she feels that there's just to much going on all at once with a jig and can't feel the bite. Is this zig jig any easer to use over a normal jig?

Posted

If you tie your own jig and are happy, don't change a thing. I think they are a very good jig, but they aren't magically better than other jigs.

It isn't difficult, but it ain't easy. You have to work the jig and pay attention.

Every Saint has a past, every Sinner has a future. On Instagram @hamneedstofish

Posted

I'm seeing a lot of talk about this "zig jig".... I have never used one. I do tie my own jigs and have for years... seem to work for me. I did look the zig up and found their site. Seems to have a little different action than what I make up. Question is, are they really any different than any other jigs? I tend to stick to the fly rod but my wife and I are heading down to the NFTW in few weeks and she only uses a spinning rod. She does fairly well with a rooster-tail and I have tried to get her to throw jigs, but like the fly rod, she feels that there's just to much going on all at once with a jig and can't feel the bite. Is this zig jig any easer to use over a normal jig?

Get a few 1/4 ounce spinners for the faster and deeper areas, I like suspending jerk baits, 4inch rapala is good, and I can find you a zig jig or two to try if you wish.

"The problem with a politician’s quote on Facebook is you don’t know whether or not they really said it." –Abraham Lincoln

Tales of an Ozark Campground Proprietor

Dead Drift Fly Shop

Posted

You might buy the wife a couple of Thomas Bouyant spoons in both sizs to try as well. Have her cast them down and across. She should vary her retrieve or at the very least raise and lower her rod tip while winding them in. They will get whacked.

Every Saint has a past, every Sinner has a future. On Instagram @hamneedstofish

  • Members
Posted

Thanks Justin and Ham for the info. I have no problem catching them with the jigs I tie just looking for something else for my wife to throw. ( she is really stuck on the R-tails and in a pinch, sometimes the good ol rebel craw )

I think I have pretty much everything I like to use along with a truck load of the Rooster-tails for her, so we should be good to go.

I am going to need to tie up a few more of my Marabou jigs but that shouldn't take long. I do have a large selection of 1/32 and some 1/16 oz, but thinking I might tie up some 1/8 just in case the water is moving. Good idea?

Thanks again guys and looking forward to the 18th at Trout Island

Posted

Thanks Justin and Ham for the info. I have no problem catching them with the jigs I tie just looking for something else for my wife to throw. ( she is really stuck on the R-tails and in a pinch, sometimes the good ol rebel craw )

I think I have pretty much everything I like to use along with a truck load of the Rooster-tails for her, so we should be good to go.

I am going to need to tie up a few more of my Marabou jigs but that shouldn't take long. I do have a large selection of 1/32 and some 1/16 oz, but thinking I might tie up some 1/8 just in case the water is moving. Good idea?

Thanks again guys and looking forward to the 18th at Trout Island

Need it to be pretty heavy to get it down on this river that's why I suggested some 1/4 ounce inline spinners, small rooster tails work well but you need to add some weight to get it down, Ham can tell you the best weight for the jigs better than I.

"The problem with a politician’s quote on Facebook is you don’t know whether or not they really said it." –Abraham Lincoln

Tales of an Ozark Campground Proprietor

Dead Drift Fly Shop

Posted

My general rule of thumb is I use 1/32 oz on minimum flow, I use 1/16 oz on less than 1000 CFS, and 1/8 oz 1000 to 10000 CFS. I'bve got some 3/16 oz for heavier flows BUT I haven't fished them yet.

But try different stuff. On different days this fish want different things

Every Saint has a past, every Sinner has a future. On Instagram @hamneedstofish

  • Members
Posted

Lizard,

I have found on the NFoW that anything bigger than a 1/8 oz jig gets hung up behind and between rocks and gets broken off. Usually the fish are in either lazy mode and like an 1/8th or 1/16 oz jig (the lightest you can cast for about 50 to 75 ft) bounced off the bottom. Or in pursuit mode and like a rooster tail or a small crank like a rebel craw or a flicker shad. Either way if the water is off color yellow seems to work, if it's clear natural colors like brown and olive seem to work. Your gonna love Trout Island.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.