Centering pins for elaztech

[Rockhopper]

If any of your setups require a hitchhiker or centering pin to attach your plastic to a hook, here is an option that works for elaztech baits. Called a Stickr' Pin. The coil hitchhikers are almost impossible to get into elaztech but these pins are straight with barbs. They do very well alone but with a dab of glue, they are exceptional. Mr Twister has them on some of their hooks but they don't sell them unless you buy them already attached to a hook, at least to my knowledge. I've been searching for these for awhile and finally came across them the other day. Not affiliated with them whatsoever, just sharing.

http://moanerhooks.com/product/stickr-pins/

[Dutch]

Those look like they will do the job. Thanks for the link.

I make my own screw locks so I just heat a small drill bit and melt a hole in the nose of my elaztech baits.

[dtrs5kprs]

On 1/28/2019 at 4:26 PM, Rockhopper said:

If any of your setups require a hitchhiker or centering pin to attach your plastic to a hook, here is an option that works for elaztech baits. Called a Stickr' Pin. The coil hitchhikers are almost impossible to get into elaztech but these pins are straight with barbs. They do very well alone but with a dab of glue, they are exceptional. Mr Twister has them on some of their hooks but they don't sell them unless you buy them already attached to a hook, at least to my knowledge. I've been searching for these for awhile and finally came across them the other day. Not affiliated with them whatsoever, just sharing.

http://moanerhooks.com/product/stickr-pins/

Nice find. We've been buying a Chinese knock off version of the keeper hooks, pulling the keepers, and throwing away the hooks .