J-Doc Posted April 30, 2017 Author Posted April 30, 2017 I've heard the new side scan on the birds are very impressive. I hope they increased their traditional sonar quality as well. If not, Garmin, Ray Marine, and Lowrance will bury them. Side and down scan is nice but pan optics and regular sonar improvements are even better. Need marine repair? Send our own forum friend "fishinwrench" a message. He will treat you like family!!! I owe fishinwrench a lot of thanks. He has been a great mechanic with lots of patience!
grizwilson Posted May 8, 2017 Posted May 8, 2017 usually I can research and find my answers. My 1197 has worked without a hitch since 2011. In March I updated to 6.640, when I went out in April the GPS did not work and the interlink did not show on it or the 798 on the bow. I got another interlink appeared to try to sync fine then froze. The interlink works fine on the 798. I have lost temp on the 1197, tried with two different transducers. I do not get my map page or snapshot page. Sometimes it freezes going through the views, sometimes on menu items. I have tried backing up two levels of software up date. Is it fried or ? Thanks “If a cluttered desk is a sign, of a cluttered mind, of what then, is an empty desk a sign?”- Albert Einstein
J-Doc Posted May 8, 2017 Author Posted May 8, 2017 46 minutes ago, grizwilson said: usually I can research and find my answers. My 1197 has worked without a hitch since 2011. In March I updated to 6.640, when I went out in April the GPS did not work and the interlink did not show on it or the 798 on the bow. I got another interlink appeared to try to sync fine then froze. The interlink works fine on the 798. I have lost temp on the 1197, tried with two different transducers. I do not get my map page or snapshot page. Sometimes it freezes going through the views, sometimes on menu items. I have tried backing up two levels of software up date. Is it fried or ? Thanks Sounds like you need to call the manufacturer and talk to their tech department. If under warranty, they will fix or replace. They might be able to repair it also but the repair costs may warrant a new unit. Only way to know is to contact manufacturer and explain what is happening. I've had that happen before and Lowrance tech support was mildly helpful. I ended up figuring out it was user error on my end. Need marine repair? Send our own forum friend "fishinwrench" a message. He will treat you like family!!! I owe fishinwrench a lot of thanks. He has been a great mechanic with lots of patience!
grizwilson Posted May 8, 2017 Posted May 8, 2017 Thanks J doc, as the unit is 6 years old afraid I am in a jam, no loose resources to replace. Will contact Humminbird today. But having had that experience before not too excited. “If a cluttered desk is a sign, of a cluttered mind, of what then, is an empty desk a sign?”- Albert Einstein
J-Doc Posted May 8, 2017 Author Posted May 8, 2017 Ouch. At 6yrs old, I'm afraid they will automatically say "toast". That's no good. Need marine repair? Send our own forum friend "fishinwrench" a message. He will treat you like family!!! I owe fishinwrench a lot of thanks. He has been a great mechanic with lots of patience!
grizwilson Posted May 8, 2017 Posted May 8, 2017 Well Humminbird says sorry. “If a cluttered desk is a sign, of a cluttered mind, of what then, is an empty desk a sign?”- Albert Einstein
176champion Posted May 21, 2017 Posted May 21, 2017 Helix 7 DI....is the sonar screen like this because of all the dirt and mud in the water?....i have tried to turn down sensitivity and changed from 455mhz to 800mhz and i still get the same picture thats on top... I know everything about nothing and know nothing about everything! Bruce Philips
J-Doc Posted May 21, 2017 Author Posted May 21, 2017 Yes, if the water is dirty and full of heavy particulate, that is most likely the reason. Good call!!!! Need marine repair? Send our own forum friend "fishinwrench" a message. He will treat you like family!!! I owe fishinwrench a lot of thanks. He has been a great mechanic with lots of patience!
Ketchup Posted May 25, 2017 Posted May 25, 2017 Ok J, Got a silly question for ya. Busted off my transducer last week and got the new one installed today. In the settings tab there is "connected transducer" with options. Heres the options. Can you tell me the best option i have? Thanks. Dual 50/200 Dual Beam Sidescan Compact Sidescan Hi-Def Sidescan P.S i warned ya last year i was not very smart at this electronic stuff. HB 999 TinBoats BassClub. An aluminum only bass club. If interested in info send me a PM.
LittleRedFisherman Posted July 7, 2017 Posted July 7, 2017 Anybody missing a canoe? Daryk Campbell Sr, slothman, snagged in outlet 3 and 2 others 5 There's no such thing, as a bad day fishing!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now