Jump to content

Recommended Posts

Posted

photo_3_30_zps863261bf.jpg

http://www.bassmaster.com/blogs/2014-elite-series-table-rock-live-blog/davis-table-rock-magic-bait

Interesting blog about the bait that Mark Davis used to catch several of his fish last week.

Apparently he used this combo much like a crankbait.

I have used something very similar. Same free-swinging football head, but with a beaver trailer.

Now that I think of it, I usually got bit when I first engaged the reel after the cast, or when I was pulling it up over a rock or limb?

Never thought to swim it? Guess I will now!

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Question, is that head just threaded over the hook and moved up to the eye or is it attached with a split ring. Also it looks to me like a 3/8th.

Mark said he was fishing it like a cranbait right on the bottom, and if it hit a rock he would shake it off but kept it moving and swimming at all times.

I do think we need much form info on this bait. Looks like the deal for Jaws or K's and I do not believe it has really caught on that well here.

Also look at his trailer. When I have fished it I have used a bigger bait like a smallie beaver. He pretty much has a small craw on it. If you remember from the short video he had it is just about the size of the dad that the fish spit in his boat.

Posted

That looks like any of the other heads of that type, with the hook molded on. Guessing 3/8 is probably close, maybe 5/16. Doing the split ring thing is problematic because you have to account for the hook eye in relation to the attachment point. A regular worm hook will mold on because the eye is perpendicular to the wire loop. Using something like a 30 degree wide gap jig hook would require a single ring, or a loop turned perpendicular to the tie loop.

Whew. That almost hurt. Dangerously close to geometry.

It brings up one problem with them. If you roll a point you either toss the head or have to add two rings in series to attach another EWG hook. Then you are dragging a little choo-choo train along.

It is an interesting little plastic. There are a couple of little craws that might work.

Think we get so caught up with the fb jig and grub that we have overlooked this head. There was a video at one point of the actual designer. Seems like he was a guide at Grand. He set it up for clients with trick worms.

Posted

the biffle hardhead has been a mainstay in my tackle box for 3 years.

I actually stopped buying FB jigs in favor of the BBug

Baby brush hogs or swimbaits will not catch a fish on there. not one (sarcasm)

This has been my secret weapon

Posted

Pigsticker baits sells one with the horizontal hook hanger (Pig-Rig) and a split ring, so you can change out your hooks without snipping off the hook and adding a couple of rings like some of the other brands. Or you can take off the split ring and substitute one of those wire duo-lock deals.

Posted

I too have fished a biffle head, but now days I find a jikka rig hangs less but still allows the hook to free swing like the biffle. Plus, if you use a coast lock instead of a split ring, changing the weight size is easier. Guess I need to swim it sometimes.

This makes the best jikka rig weight for a coastlock system:

http://www.cabelas.com/product/Northland-reg-Roach-Rig-reg-Walker-Sinkers/1208846.uts?productVariantId=2805378&WT.tsrc=CSE&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03088462&rid=40&channel=GoogleBaseUSA&mr:trackingCode=28E43CE2-B076-E011-B343-001B21631C34&mr:referralID=NA&mr:device=c&mr:adType=pla_with_promotion&mr:ad=30640523471&mr:keyword&mr:match&mr:filter=57965685671&gclid=CM7S15D1zr0CFRQV7AodYW8Avw&gclsrc=aw.ds

Posted

Pigsticker baits sells one with the horizontal hook hanger (Pig-Rig) and a split ring, so you can change out your hooks without snipping off the hook and adding a couple of rings like some of the other brands. Or you can take off the split ring and substitute one of those wire duo-lock deals.

Have a couple made that way, but have only thrown the original to date.

Won't go near the walleye bits. Afraid I would end up catching them ;-) .

Posted

I think I might take some scissors and "modify" some green punkin twin tail chompers?

Or maybe even take a 4" or 5" grub and snip off about half the tail and split it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.