Members buck818 Posted March 30, 2016 Members Posted March 30, 2016 I need your help in trying to identify this mount. It goes on a 2014 Ranger 521c and mounts between the drivers console and the gunnel. The picture may not show up very well but the arm is actually arched forward. The height helps clear the side of the console and the sweep forward get if pretty close to even with the dash. And yes I know I'm probably not on the right forum. Thanks for your help.
Ketchup Posted March 30, 2016 Posted March 30, 2016 Is that a factory installed mount? If so maybe a look at a Ranger Boats site may help. Are your intentions to replace it as it looks broken? If so maybe a RAM mount would fit that area well. I'm sure someone here will have an answer on that mount. TinBoats BassClub. An aluminum only bass club. If interested in info send me a PM.
Members buck818 Posted March 30, 2016 Author Members Posted March 30, 2016 It's not a factory mount. It was installed at Tailwater Marine. I have spoke with them and of course they can't remember where they got it or a mfg. My fear with the ram mount is the mounting plate has to be set up forward a little to clear the flare of the console. The farther towards the driver the more the console flares out. So a ram would work, but the graph would be well infront of the face of the console. Does that make sense? That's where the arch in the old mount worked out well as it placed the graph back towards my old fading eyesight.
abkeenan Posted March 30, 2016 Posted March 30, 2016 Buck, I would post this over on Bass Boat Central as they have probably 100 times the amount of traffic going to their site than here on Ozark Anglers. Lot of guys that know what they are talking about there. I don't visit there much anymore as it is like the Jerry Springer Show with the nonsense that takes place but there is a lot of knowledgeable folk over there that could steer you right. big c 1
crazy4fishin Posted March 30, 2016 Posted March 30, 2016 Buck - here is the link http://www.bbcboards.net/forumdisplay.php?f=47 ab is right...it can get weird over there at times but there are some pretty smart folks when it comes to stuff like this. C4F Crazy4fishinA Cornhusker
Sore Thumbs Posted March 30, 2016 Posted March 30, 2016 I have a Balzout Anodized aluminum mount. I love it. There are no balls on it. It stays solid and will not move.
Champ188 Posted March 30, 2016 Posted March 30, 2016 I have a Balzout Anodized aluminum mount. I love it. There are no balls on it. It stays solid and will not move. It's kind of getting weird here. crazy4fishin, abkeenan, Codywskeeter1521 and 1 other 4
Sore Thumbs Posted March 31, 2016 Posted March 31, 2016 Ha! Here they are Codywskeeter1521 and Champ188 2
crazy4fishin Posted March 31, 2016 Posted March 31, 2016 Look....no balls!!! C4F Sore Thumbs, Champ188 and 176champion 3 Crazy4fishinA Cornhusker
Members buck818 Posted March 31, 2016 Author Members Posted March 31, 2016 Sore Thumbs, I looked at those mounts on line. What is the boat u have it mounted on?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now