Jump to content

Speaking of hoarding...


kjackson

Recommended Posts

20 hours ago, fishinwrench said:

I tied up a batch of Sexy Shad colored (white/yellow/lt.blue w/ silver flash) Clousers back in September and they've been killers.   Sat down to tie up a dozen more and discovered that the white that I used was FLUORESCENT WHITE.    Oh No! my "fluorescent white" tail is all used up.   I have 4 full, and gorgeous, WHITE tails.    

Do I take a chance that regular WHITE is fine?    Oh hell to the NO!     So, had to order a pair of FLUORESCENT WHITE deer tails.....and of course while I'm ordering stuff I probably should get more 6/0 thread and I can never have too many 1/40th lead dumbbell eyes, ect. And WOAH, hooks are on sale until after Christmas!

Grand total for 2 deer tails=176.78

 

This is how we end up with cases full of $#!t, and then later wonder why ! 

When I read this, I started to twitch. Fluorescent white? I don't have any fluorescent white!  I need... but then I wondered about the fluorescence...could the tail have been treated to reflect UV? Was that part of the dye process?  If the fluorescent white turns out to be the secret to that pattern's success, and if that buck tail does reflect UV, then it opens a whole can of worms. 

Back when I was writing for a trade magazine, I did a piece on the response to UV by fish, and it gets complicated quickly with different life stages of various fish species responding differently to UV reflectance. In some cases, some fish can see UV and in some cases use it to determine whether or not they will eat whatever. 

It's kind of a big deal in salmon and associated species, but not much has been researched in other fish. It is possible that the fluorescent white buck tail does reflect UV, and it could really be the trigger for Wrench's success with this fly. so it's possible that fly tyers need to start using more UV materials in our region.

That means we need to buy more materials... sigh. And I probably need to place an order.

 

Link to comment
Share on other sites

2 hours ago, kjackson said:

When I read this, I started to twitch. Fluorescent white? I don't have any fluorescent white!  I need... but then I wondered about the fluorescence...could the tail have been treated to reflect UV? Was that part of the dye process?  If the fluorescent white turns out to be the secret to that pattern's success, and if that buck tail does reflect UV, then it opens a whole can of worms. 

Back when I was writing for a trade magazine, I did a piece on the response to UV by fish, and it gets complicated quickly with different life stages of various fish species responding differently to UV reflectance. In some cases, some fish can see UV and in some cases use it to determine whether or not they will eat whatever. 

It's kind of a big deal in salmon and associated species, but not much has been researched in other fish. It is possible that the fluorescent white buck tail does reflect UV, and it could really be the trigger for Wrench's success with this fly. so it's possible that fly tyers need to start using more UV materials in our region.

That means we need to buy more materials... sigh. And I probably need to place an order.

 

            After the Wrench post I went into the tying room and grabbed my UV cure light, Hit my bucktails and yes some have the UV fluorescent glo. None of my white bucktails do and I catch lots of fishes on white belly Clouser minnows. Gosh I would probably catch a whole lotta more fishes with UV white. 🤪I will continue to use my own tails as a byproduct from hunting. UNLESS some geneticist creates a UV deer.

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Link to comment
Share on other sites

"Brighter" whites, generally stand out because they've been punched with the UV dye or bleach or whatever as I recall. It's been a dozen years since I did the article, and I'll probably revisit some of the sites instead of organizing my tying bench.

One thing I do remember, as it's part of a patent-infringement topic, is that Damiki uses UV paints in some of their lures. It may be intentional or may not as a lot of things reflect UV, both artificial and natural.

Link to comment
Share on other sites

8 hours ago, fshndoug said:

I am going to decline from taking photos of my fly tying stuff as I don't want Johnny Morris raiding my basement when the next pandemic hits.

 

               I was wondering when you might chime in. 

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Link to comment
Share on other sites

Speaking of acquiring more stuff...Marty, did the geese you shot have flank feathers similar to those on mallards? Here I'm not talking about the barred appearance of the mallard flank, but rather the long, soft, flowing type of feather. I've not shot a goose in so long--and did so when I wasn't tying flies-- so that's why I'm asking.  I'm thinking that it might be useful as wings in a small streamer.  

Not that I need more wing material...recently I was playing around in the garage and started picking at some white rope I have, working it to produce something like fake hair or the frizzed out macrame cord.  It only needs to be on a fly or jig and fished to find out if it's workable. If it is, I could go into commercial production. 

Link to comment
Share on other sites

5 hours ago, kjackson said:

Speaking of acquiring more stuff...Marty, did the geese you shot have flank feathers similar to those on mallards? Here I'm not talking about the barred appearance of the mallard flank, but rather the long, soft, flowing type of feather. I've not shot a goose in so long--and did so when I wasn't tying flies-- so that's why I'm asking.  I'm thinking that it might be useful as wings in a small streamer.  

Not that I need more wing material...recently I was playing around in the garage and started picking at some white rope I have, working it to produce something like fake hair or the frizzed out macrame cord.  It only needs to be on a fly or jig and fished to find out if it's workable. If it is, I could go into commercial production. 

    You know I really didn't pay much attention but will look next ones we get. This happened last Thursday morning.

IMG_20231130_085806264.jpg

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.