Jump to content

Recommended Posts

Posted

    

https://www.walmart.com/ip/Benjamin-Prowler-NP-22-Caliber-Break-Barrel-Air-Rifle-with-Scope-950fps/53968156

 

     Not wrench but I just had to find this :) ,

BilletHead

 

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Posted
On ‎2‎/‎7‎/‎2018 at 6:50 PM, fishinwrench said:

I A little tough she says :D IMG_20180207_184203254_LL.jpg

I put fried squirrel in a dutch for a couple of hours at 275.  Nice and tender then.

Posted
53 minutes ago, DADAKOTA said:

Got a site where they are dumping them wrench?

Our Wal-Mart's (we have 3 of them around the lake) do not carry them in .22, only .177 or I would have already grabbed one.   Yours might, you'll have to check.    

PA has them marked at 120.00 still, but way better deals are out there.

https://www.pyramydair.com

 

Posted

Found one tucked back under the shelf at our Wal-Mart, had my wife do the price check thing and I'll be darned if it didn't come up 67.99

Needless to say I snatched it up, and grabbed a Simmons 4x32 to put on it for 30.00 while I was there.   Gave it a good bore scrub and took it to the back yard.   Even in these gale force winds the thing only took 5 shots to sight-in and 3/4" groups at 25 yards is no problem.    The gun feels solid, and aside from needing some trigger work I'd say this is the buy of the year.   Pretty darn nice!    Hits like a hammer.

Posted

Its a Centerpoint Scope, should hold up, they are one of the few that are designed for springers and goofy recoil.  Looks like $68 at Wally World, great price for a Nitro Piston.

"Life has become immeasurably better since I have been forced to stop taking it seriously."

Hunter S. Thompson

Posted
1 hour ago, fishinwrench said:

Found one tucked back under the shelf at our Wal-Mart, had my wife do the price check thing and I'll be darned if it didn't come up 67.99

Needless to say I snatched it up, and grabbed a Simmons 4x32 to put on it for 30.00 while I was there.   Gave it a good bore scrub and took it to the back yard.   Even in these gale force winds the thing only took 5 shots to sight-in and 3/4" groups at 25 yards is no problem.    The gun feels solid, and aside from needing some trigger work I'd say this is the buy of the year.   Pretty darn nice!    Hits like a hammer.

         You are going to start a wal mart stampede just like black Friday, way to go Wrench :) ,

BilletHead

"We have met the enemy and it is us",

Pogo

   If you compete with your fellow anglers, you become their competitor, If you help them you become their friend"

Lefty Kreh

    " Never display your knowledge, you only share it"

Lefty Kreh

         "Eat more bass and there will be more room for walleye to grow!"

BilletHead

    " One thing in life is for sure. If you are careful you can straddle the barbed wire fence but make one mistake and you will be hurting"

BilletHead

  P.S. "May your fences be short or hope you have long legs"

BilletHead

Posted
1 hour ago, jdmidwest said:

Its a Centerpoint Scope, should hold up, they are one of the few that are designed for springers and goofy recoil.  Looks like $68 at Wally World, great price for a Nitro Piston.

If someone has never experienced a good scope then they might be able to tolerate it.  The Simmons I put on mine, for a cheapie is nice and clear and has surprisingly good turrets. 

The rifle is solid, feels good.  I'm still kinda blown away that they are dumping them that cheap.   Might go grab another one just cause.

Posted

The Charlie D Tuna trigger did wonders for my Benjamim NP2.  $30 bucks and a month wait, but it's a tack driver now. 10-15 minutes to install.

Posted
3 hours ago, Gavin said:

The Charlie D Tuna trigger did wonders for my Benjamim NP2.  $30 bucks and a month wait, but it's a tack driver now. 10-15 minutes to install.

I think this one takes the same kit? Same piston, gas ram, and barrel as yours.  So I assume it's the same trigger assembly.

I can actually live with this one, I think.  Nothing rough or jerky about it, just a bit creepy.  I can actually get it right to the let off, steady up, then pop the shot with another light touch.   Looking forward to shooting some tomorrow in less WIND.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.