2018 Motorguide X5 105 36V bow mount 50" TM

[Bill Babler]

MAKE OFFER. ANYTHING REASONABLE WILL BE ACCEPTED.

I have for sale a 2018 bow mount Motorguide X5 36V 50" trolling motor with 105 lbs. thrust. Digital with Kevlar shaft

Motor was new this past January and only slightly used.

It has an extremely hot new transducer that I'm only running on 58% 

IT has the following add on's in addition to the transducer:  TH Marine Equalizer lift assist

TH Marne Prop Anti-vibration Nut 

Machette Prop

The add on's are worth over $200.00  I also have the original prop and prop nut unused.

This is not a GPS pinpoint unit, it is a straight 36V trolling motor that is almost new out of the box and works perfectly.  If you need one or just a spare and don't want to spend a couple of thousand on a Minnkota or over $1,500 on a new one of these you can buy this one for.

ANY REASONABLE OFFER ACCEPTED

Call or send a PM 417-332-7016

 

 

 

 

[Johnsfolly]

On ‎6‎/‎11‎/‎2019 at 12:12 PM, Bill Babler said:

I have for sale a 2018 bow mount Motorguide X5 36V 50" trolling motor with 105 lbs. thrust. Digital with Kevlar shaft

Motor was new this past January and only slightly used.

It has an extremely hot new transducer that I'm only running on 58% 

IT has the following add on's in addition to the transducer:  TH Marine Equalizer lift assist

TH Marne Prop Anti-vibration Nut 

Machette Prop

The add on's are worth over $200.00  I also have the original prop and prop nut unused.

This is not a GPS pinpoint unit, it is a straight 36V trolling motor that is almost new out of the box and works perfectly.  If you need one or just a spare and don't want to spend a couple of thousand on a Minnkota or over $1,500 on a new one of these you can buy this one for.

$600.00

Call or send a PM 417-332-7016

 

 

 

 

Deal like that makes me wish that I had a boat .

[Bill Babler]

Guys I need to get this out of my garage.  If someone would make me a decent offer I will take it.  It is ashame for this new motor to just sit here.  

[Bushbeater]

PM sent.

[Bill Babler]

sold. Thanks Bushbeater

[Bushbeater]

I finally got the install done. Put in a recessed pedal pan, hard wired the trolling motor, used an adapter to hook up to the Hummingbird. Put a 12 volt power plug where the original trolling motor plug was, for phone charging or a light. In the back I installed another battery and a switchable breaker for a disconnect. Still need a couple more battery terminal covers. It's ready for fish now.