Pallet Boards?

[oneshot]

Is there a place in SW Missouri to get old Pallet Boards. Lebanon would be better?

oneshot

[Dutch]

There is a guy on Hwy 39 just south of Greenfield who must have a thousand of them.  It is where all of the old crap trailer houses are.

[oneshot]

25 minutes ago, Dutch said:

There is a guy on Hwy 39 just south of Greenfield who must have a thousand of them.  It is where all of the old crap trailer houses are.

Do I dare go that close to my Ex?

oneshot

[oneshot]

My wife is wanting to put Corrugated Metal half way up the wall on our add on then go the rest of the way with Pallet Boards.

I’m thinking the boards will be seasoned Oak and wondering if my Nail Gun will put nails through them?

oneshot 

[jdmidwest]

Crank the air up on the nail gun if they are Oak Pallets.  Probably will split them though.

[oneshot 1]

1 hour ago, jdmidwest said:

Crank the air up on the nail gun if they are Oak Pallets.  Probably will split them though.

Well I was thinking Cedar but it will split to.

How about Screws?

oneshot

[jdmidwest]

Pre drill the holes and you should be good.  Just don't torque them down too tight.

[oneshot]

Ok was checking. Can order Pallet Boards.

Most I seen putting them up used plywood painted black then Liquid Nail and Brad Nailer.

oneshot

[MOPanfisher]

Pallet boards are poor grade lumber.  Pick up a couple sheets of T 111 or something similar (cheaper) and cut to fit.  

[oneshot]

9 hours ago, MOPanfisher said:

Pallet boards are poor grade lumber.  Pick up a couple sheets of T 111 or something similar (cheaper) and cut to fit.  

That is what we have on the outside. My wife is wanting weathered Pallet Boards. Corrugated Metal half way up on the walls and ceiling.

oneshot